Scouring water evaporator
for electroplating plants

Scouring water extraction by evaporation

The cost-efficient solution for your electroplating plant: an innovative evaporator developed specifically for electroplating by Peter Salwiczek.

The Rauch GmbH evaporator consists of an evaporator tank of some 1000 litres in volume and, optionally, a collection vat and exhaust fan.

The cost factor

One litre of water to be vaporised requires about 0.7 kW of electricity. The evaporator can handle about 100-300 litres per day at a constant temperature of 60°C.

Design

The Rauch GmbH evaporator complies with EN 60204-1. All components are CE-compliant and certified. We manufacture in accordance with Machinery Directive 98/37CEdel22/06/1998 and electromagnetic compatibility EMC 92/31CEEe93/68/CEE and WHG 19 l.

• Material:PE
• External dimensions:1300 x 1010 x 1300 mm (l x w x h)
• Volume: ca. 1000 litres
• Evaporation level: min. 200 mm max. 950 mm
• Evaporation surface: ca. 1m²
• Extraction tap: DN 50
• Insulation: clad with PP
• Operating temperature: 60° C
• Heating: teflon-coated, ca. 2.5 kW, covered heating surface ca. 0.8 m²
• Safety device: PT 100 controller, limiter, minimum level cutout
• Switchbox: plastic casing 375 x 250 x 125 mm, digital display EDIG showing actual value, set value and limiter; 2 contactors, master switch, control switch, 3 automatic circuit breakers, sensor connection, heating connection, motor circuit breaker, power supply: 240 V

Optional:

• floor collection vat: 1300 x 1010 x 1300 mm, PP, grey
• extractor: PP, grey, 125 mm in diameter, throttle valve, exhauster at 300 m³/hr
• agitator

Delivery period:

The Rauch GmbH evaporator has a delivery period of 2-4 weeks.

Gallery